How do i adjust the brakes on my Veloped/Walker?

Question

How do i adjust the brakes on my Veloped/Walker?

Was this helpful?
Yes
No

Glad we could help. Thanks for your feedback!

Please give us feedback or ask us over:
0330 828 5869
Chat with us
Mail

Or share your feedback directly:

Thank you! Your feedback has been sent. We'll get back to you soon.

Sorry, there was an error sending your feedback. Please try again.

Accepted Answer

To ensure that you can use your Veloped/Walker safely, with time you need to adjust the brakes as they get worn. Adjusting the brakes requires an 8mm spanner.

Just follow these simple steps:

Step 1. Start by detaching the rear wheel.

Step 2. Where the brake cable enters the brake, screw the adjustment screw counter-clockwise (outwards) to tighten the brake, and screw the adjuster screw clockwise (inwards) to loosen the brake. This requires an 8mm open spanner.

Step 3.Attach the wheel and test the brake function to ensure that you can both engage the motion brake and also the parking brake.