How to replace the brake lever on a Trionic rollator?

Question

How to replace the brake lever on a Trionic rollator?

Was this helpful?
Yes
No

Glad we could help. Thanks for your feedback!

Please give us feedback or ask us over:
0330 828 5869
Chat with us
Mail

Or share your feedback directly:

Thank you! Your feedback has been sent. We'll get back to you soon.

Sorry, there was an error sending your feedback. Please try again.

Accepted Answer

You can replace a worn brake lever on a Trionic Walker or Veloped yourself in a few minutes with basic tools: take off the handle grip and the rear wheel, unbolt the old lever, unhook the brake cable, then fit the new lever and reassemble in reverse order. The full steps are below.

To replace the brake lever:

Loosen the rear screw of the handle and pull the handle off the handle tube.
Loosen the brake lever bolt (one turn) and pull it off the grip tube.
Remove the rear wheel.
The brake lever body, have screw and nuts which all have to be in line. If you put the gauge on a leash, you can pull the brake cable out to unhook it from the brake lever (keep the brake housing straight).
To mount the new brake lever, as above but in reverse.